ACCADEMIC STATUS: Professor in IUST
Fields of Research Interests:
Ceramics, Refractories, Raw Materials, Traditional Ceramics.
School of Metallurgy & Materials Engineering
Iran University of Science and Technology (IUST), Narmak, Tehran, Iran
Tel: +9821-7724540-550 , Ext: 2856
Year of Graduation
Materials and Metallurgy
Iran University of Science and Technology
Iran University of Science and Technology
University of Sheffield
•Physical properties of ceramics
•Advance characterization of materials
•Advance synthesis of materials
•Processing lab- 2
•Advance characterization lab
Effect of Al2O3 content on crystallization behavior, microstructure , and mechanical properties of SiO2-Al2O3-CaO-MgO glass-ceramics, Applied Ceramic Technology, 8, 203-213, (2011).
Prepration of poly (3-hydroxybutyrate)/nano-hydroxyapatite composite scaffolds for bone tissue engineering, Materials Letter, 65, 736-739, (2011).
Investigation of the percentage crystallization in glass ceramics using an image analyzer method, Ceramic Processing Research, 12, 34-37, (2011).
Effect of TiO2 on phase evolution and micrstructure of MgAl2O4 spinel in different atmospheres, Ceramic International, 37, 349-354, (2011).
Sintering behavior of nano alumina powder shaped by pressure filtration, Ceramics International, 37, 9–14, 2011.
Synthesis and characterization of Al2O3-SiC nano composite by sol-gel method and the effect of TiO2 on sintering,Journal of Nano Research, 13, 7-19, (2011).
Z. Zadegan, M. Hossainalipour, H. Ghassai, H.R. Rezaie, M.R. Naimi-Jamal "Synthesis of cellulose - nanohydroxyapatite composite in 1-n-butyl-3-methylimidazolium chloride", Ceramic International, 36,2010,pp.2375-2381.
An investigation about the activation energies of the reduction transitions of fine dispersed CuWO4−x/WO3−x oxide powders, International Journal of Refractory Metals and Hard Materials, 28, 383-387, (2010).
Illustration of effective parameters on growth of ZnO Micro/Nano rods, on the borosilicate glass via hydrothermal process, Journal of Nanoscience and Nanothecnology, 10, 7455-7458, (2010).
|A. Yazdani, H.R. Rezaie, H. Ghassai, "Investigation of hydrothermal synthesis of Wollastonite using Silica and Nano Silica at different pressures", Journal of Ceramic Processing Research, 11,2010,pp.348-353.|
Effect of APC addition on stability of nanosize precursors in sol-gel processing of SiC nanopowder, Journal of Alloys and Compounds, 505, 692-697, (2010).
Sintering behavior of an ultrafine alumina powder shaped by pressure filtration and dry pressing, Material Science and Engineering A, 527, 3807–3812, (2010).
Synthesis of WC–20 wt. % Cu composite powders by co-precipitation and carburization processes, Materials Science-Poland, 28, 413-420, (2010).
Investigation of biphasic calcium phosphate/gelatin nanocomposite scaffolds as a bone tissue engineering, Ceramics International, 36, 2421–2426, (2010).
Chemical mechanism of precipitate formation and pH effect on the morphology and thermochemical co-precipitation of W–Cu nanocomposite powders, Materials Chemistry and Physics, 123, 83–90, (2010).
Investigation of mechanical properties of experimental Bis - GMA/TEGDMA dental composite resins containing various mass fractions of silica nanoparticles,Journal of Prosthodontics, 19, 112-117, (2010).
Preparation of a novel biodegradable nanocomposite scaffold based on poly (3-hydroxybutyrate)/bioglass nanoparticles for bone tissue engineering, Journal of Materials Science: Materials in Medicine, 21, 2125-2132, (2010).
Effect of precursor rooted contamination in the sintering and densification behavior of thermochemically manufactured W-CU nanocomposite, International Journal of Modern Physics B, 24, 183-190, (2010).
|A. Mostaed, E. Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, " The influence of milling time and impact force on the mutual diffusion of Al and Cu during synthesis of Al-4.5wt%Cu alloy via mechanical alloying", Defect and Diffusion Forum, 2009|
|A. Mostaed, E. Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, " Effect of SiC particles volume fraction on the mutual diffusion of Al and Cu during fabrication of Al-4.5wt% Cu/SiC via mechanical alloying", Defect and Diffusion Forum, 2009|
|H.R. Rezaie, R. Naghizadeh, N. Farrokhnia, S. Arabi, M. Sobhani, " The Effect of Fe2O3 addition on tialite formation", Ceramics International 35, 2009, pp. 679-684|
|S. Banijamali, B. Eftekhari, H.R. Rezaie, V.K. Marghussian, "Crystallization and sintering characteristics of CaO-Al2O3-SiO2 glasses in the presence of TiO2, CaF2 and ZrO2" Thermochimica Acta, 2009, pp. 60-65|
|M.R. Rezaie, H.R. Rezaie, R. Naghizadeh, " The effect of SiO2 additions on barium aluminate cement formation and properties", Ceramics International, 2009|
The effect of sintering temperature on densification of nanoscale dispersed W–20–40%wt Cu composite powders, International Journal of Refractory Metals and Hard Materials, 27, 862-867, (2009).
|R. Naghizadeh, H.R. Rezaie, F. Golestani-Fard, " The influence of composition, cooling rate and atmosphere on the synthesis and thermal stability of aluminium titanate", Materials Science and Engineering B, 157, 2009, pp. 20-25|
|M. Bavand-Vandchali, H. Sarpoolaky, F. Golestani-Fard, H.R. Rezaie, "Atmosphere and carbon effects on microstructure and phase analysis of in situ spinel formation in MgO-C refractories matrix", Ceramics International 35, pp. 861-868, 2009|
Thermochemical preparation of W–25%Cu nanocomposite powder through a CVT mechanism, Materials Characterization, 60, 1232-1240, (2009)
|M. Ebrahimi, J. Javadpoor, H.R. Razaie, M. Goodarzi, " Mechanochemical synthesis of alumina-zirconia nanocomposite powder", Advances in Applied Ceramics, 107, 2008|
|A.M. Zahedi, H.R. Rezaie, J. Javadpoor, M. Mazaheri, M.G. Haghighi, " Processing and impact behaviour of Al/SiCp composites fabricated by the pressureless melt infiltration method", Ceramic International, 2008|
|G. Naderi, H.R. Rezaie, A. Shokuhfar, R. Naghizadeh, S. Atashgar, "The effct of talc on the reaction sintering, microstructure and physical properties of Al2TiO5 based ceranics", Journal of Ceramic Processing Research, Vol. 9, No. 2, 2008|
|R. Naghizadeh, H.R. Rezaie, F. Golestani-fard, " Phase and microstructural evolution of high TiO2-containing Iranian bauxite at high temperatures in different atmospheres", Journal of Ceramic Processing Research, Vol. 9, No. 4, 2008, pp. 343-347|
|M. Bavand, F. Golestani-Fard, H. Sarpoolaky, H.R. Rezaie, C.G. Aneziris, "The influence of in situ spinel formation on microstructure and phase evolution of MgO-C refractories", Journal of the European Ceramic Society 28, 2008, pp. 563-569|
|H.R. Zargar, F. Golestani-Fard, H.R. Rezaie, "The influence fo nano boehmite on spinel formation in the alumina-magnesi system at low temperatures", Journal of Ceramic Processing Research, Vol. 9, No.1, 2008, pp. 46-51|
H.R. Rezaie, R. Naghizadeh, F. Ariapour, R. Ghasemzadeh, S. Eslami, "An evalution on sol-gel chemical processing of refractory barium hexa aluminate fibrous structures", Journal of Ceramic Processing Research, 2008
|S. Mobini, J. Javadpour, M. Hosseinalipour, A. Khavandi, H.R. Rezaie, M. Ghazi-Khansari" Synthesis and characterization of gelatin-nano hydroxyapatite composite scaffolds for bone tissue engineering", Advandes in Applied Ceramics, 2007|
M. Bavand, F. Golestani-Fard, H. Sarpoolaky, H.R. Rezaie, C.G. Aneziris, "The influence of insitu spinel formation on microstructure and phase evolution of MgO-C refractories", Journal of the European Ceramic Society, 2007
G. Naderi, A. Shokuhfar, H.R. Rezaie, R. Naghizadeh, T. Shokuhfar, "Effect of micron and nanosize oxide material additives on reaction sintering, micro structural and physical properties of Al2TiO5 based ceramics", Materials Science Forum, Vol. 553, 2007, pp. 266-272
H.R. Zargar, F. Golestani-Fard, H.R. Rezaie, "The influence of nano boehmite on spinel formation in the alumina-magnesia system at low temperature", Journal of Ceramic Processing Research, Vol. 6, 2007
M.N. Khezrabadi, J. Javadpour, H. R. Rezaei, R. Naghizadeh, "The effect of additives on the properties and microstructures of Al2O3-C refractories", Journal of Materials Science, 2006
A. A. Nourbakhsh, F. Golestani Fard, H. R. Rezaie , " Influence of additives on microstructural changes in nitride bonded I refractories ", J. of the European ceramic society , Vol. 26, 2006, pp. 1737-1741
H. Baradari, H. Amani, S. Karimi, H. R. Rezaie, J. Javadpour, H. Sarpoolaky, "The effect of raw materials concentration on hydroxyapatite powder characteristics and sintering behaviour", Iranian J. of Mat. Sci. and Eng., Vol. 1, 2006
S. Banijamali, B. Eftekhari, H. R. Rezaie, V. K. Marghussian, "Effect of fluorine content on sintering and crystallization behaviour of CaO-Al2O3-SiO2 glass ceramic system", Advanced in Applied Ceramics, Vol. 6, 2006
S. Banijamali, H. R. Rezaie, B. Eftekhari, V. K. Marghussian, "Sinterability, crystallization and properties of glass-ceramic tiles belonging to CaF2-CaO-MgO-Al2O3-SiO2 system", Ceramics Int. , 2006
A.A. Nourbakhsh, F. Golestani Fard, H. R. Rezaie, "Influence of additives on microsturctural changes in nitride bonded SiC refractories", J. of the Eur. Cer. Soc., Vol. 26, 2006, pp. 1737-1747
|Zahra Mahmoudi, Hamid Reza Rezaie, Hossein Ghassai, "Investigation of Different Phase Formation in a Frittic Glaze at Different Temperatures" 15th. International Metallurgy and Materials Congress, Istanbul- Turkey, 2010|
|M.Bavand-Vandchali, H.Sarpoolaky, F.Golestani Fard, H.R. Rezaie" Corrosion study of spinel-bonded MgO-C refractories by silicate slags"51th Int. Colloquium on refractories-refractories for metallurgy,2008|
|A.Mostaed, E .Mostaed, A.Shokuhfar, H.Saghafian, H.R.Rezaie" Fabrication of nanostructured Al-4.5 wt% Cu alloy and Al-4.5 wt% Cu/SiC composite via mechanical alloying"|
M. Sobhani, H. R. Rezaie, R. Naghizadeh, M. Samadani, " Low temperature synthesis of aluminium titanate (Al2TiO5) nanocrystalline by sol-gel method ", First in congress on nanoscience & nanotechnology, 2006.
H. R. Rezaie, F. Arianpour, R. Naghizadeh, F. Kazemi , "An evaluation of the effects of different phosphate binders on the properties and microstructure of tundish coating refractories", Conf. Ashen, 2006.
A. Najafi, H. Sarpoolaky, F. Arianpour, H. R. Rezaie, F. Golestani Fard, "An investigation on the effects of particle size distribution on the properties and flowability of Alumina spinel self flow refractory castables", Unitcer congress, 2005.
F. Arianpour, H. R. Rezaie, R. Naghizadeh, A. Najafi, "An evaluation on the properties of magnesia insulating refractories for Tundish coating at different temperatures", Unitcer congress, Japan, 2005.
H. R. Rezaie, R. Naghizadeh, F. Aryanpur, "Effect of Magnesia and Binder type on properties and performance of Tundish coating refractories", Unitcer congress, Japan, 2003.
H. R. Rezaie, R. Naghizadeh, F. Aryanpur, J. Kazemi, "Investigation and improvement of tundish lining refractories", The forth international symposium on refractories, China, 2003.
Preparation and investigation of tialite and its stability
Ministery of education
Investigation of standards for silica refractories
Awards and Scholarships
Ceramographic competiton , USA
(Third prize (mullite
International conference of materials, UK
(First prize (mullite
University of sheffield, UK
First prize (mullite
Institute of materials, UK
First prize (mullite